100% Original innokin itaste vv 3.0 express kit
1.Variable Voltage: voltage can be adjusted from 3.3 - 5.0 volts in .1 volt increments.2.Variable Wattage:Wattage can be adjusted from 6.0 - 11.0 W in .5 watts increments.3.Ohms meter: Resistive Load ..
- Product Code: M00001277
- Availability: In Stock
1.Variable Voltage: voltage can be adjusted from 3.3 - 5.0 volts in .1 volt increments.
Wattage can be adjusted from 6.0 - 11.0 W in .5 watts increments.
3.Ohms meter: Resistive Load Detection.
4.Puff Counter: The puff counter will record how many puffs you have taken.
The records will be cleared when the device is turned off.
5. Short Circuit/Atomizer Protection:
Short Circuit/Atomizer Protection helps protect the iTaste VV against faulty atomizers.
The iTaste VV monitors the battery voltage and will automatically turn off when the battery is discharged.
7.Innokin itaste vv3.0 with LED Battery Indicator:
The iTaste VV battery utilizes an advanced capacity display via green, yellow and red LED lights.
Users will know the battery's capacity via the color of the LED Button.
The LED lights will show green, yellow or red to indicate full battery life, half capacity or charging needed.
The iTaste VV e-cigarette features a built-in 800 mAh polymer Li-Ion rechargeable battery.
The iTaste VV is threaded to accept 510 accessories,
including the iClear10,iClear16, and iClear30 clearomizers.
10.ON/OFF Battery Switch:
Quickly clicking three times will power the device on or off.
Once the device is on, holding down the button will activate the battery.
This safety feature prevents the atomizer from turning on
while it's in your pocket or bag, as well as inadvertent settings changes.
If the button is held down for 10 seconds or longer,
the iTaste VV will shut itself off until the button is released.
The iTaste VV is charged through a Micro USB Port. You can recharge it with any standard MicroUSB cable.
It can also work as a pass-through device for simultaneous vaping and charging.
The device remembers the last voltage or wattage used when switching batteries.
14. Display Information:
The bright display shows resistance (ohms), voltage, wattage, atomizer voltage output, puff count, and last-used settings.
check the innokin MVP4 100w starter kit here
- Type: VV VW Mod
- Brand: Innokin
- Model: itaste vv3.0
- Colors: White, Black, Chameleon
- Material: Aluminum
- Working Wattage: 6W-11W
- Working voltage: 3.3v-5.0v
- Max Output Current: 3.5A
- Thread: 510
- Battery capacity: 2000mAh
1*innokin itaste vv3.0
Note: please ensure you have basic knowledge on how to properly to use it.
1)If the tanks use sub ohm coils, vapers must be sure that your device and batteries can handle sub ohm coils, only recommend experienced users order this, extra safety precautions should be practiced when using a sub ohm tank. the tank only work with the mod that can support the atomizer and coil.if you have a tank and resistance is 0.3ohm, you must sure that the mod or battery can support resistance low to 0.3ohm.improper use and lead to injury or damage.use the OHMS LAW Calculator to check.if you have question,please feel free to contact us.
2)if the coils are sub ohm coils, the user should be sure that the tank and mods can handle the sub ohm resistance coils, please make sure you have the great understanding of them, if you are not sure, please do not order and use, welcome contact us any time to get help.
3)users need pay attention to Li-ion cells when vaping.the batteries very sensitive to charging characteristics and may explode or burn if mishandled.so vapers must have enough knowledge of Li-ion batteries in charging, discharging and assembly before use. please use the fire-proof surface battery charger, never leave charging battery unattended.we will not responsible for damage for the human reason or mishandling of Li-ion batteries and chargers.the device always recommend work with rechargeable lithium-ion IMR batteries with min output current 20A or higher.
4) Smokstore will not responsible or liable for any injury, damage, defect, permanent or temporary that may be caused by the improper use of Li-ion battery, coils, tanks, mods etc.please have a basic knowledge of batteries.welcome to contact us anytime to get help.